Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 66

Configuring with Web Based Management
4.4 "System" menu
● "System Contact" input box
You can enter the name of a contact person responsible for managing the device. A
maximum of 255 characters are possible.
● "System Location" input box
You can enter the location where the device is installed. The location is displayed in the
selection area. A maximum of 255 characters are possible.
Note
Permitted characters
The following printable ASCII characters (0x20 to 0x7) are permitted in the input fields:
• 0123456789
• A...Z a...z
• !"#$%&'()*+,-./:;<=>?@ [\]_{|}~¦^`
Procedure
1. Enter the contact person responsible for the device in the "System Contact" input box.
2. Enter the identifier for the location at which the device is installed in the "System
Location" input box.
3. Enter the name of the device in the "System Name" input box.
4. Click the "Set Values" button.
Note: Steps 1 to 3 can also be performed with the SNMP Management Tool.
66
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02