Static Leases - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
● Use Interface IP
Specify whether or not the internal IP address of the device will be used.
● Value
Enter the value that is transferred to the DHCP client. The content depends on the DHCP
option.
– DHCP option 67 (boot file name)
– Enter the name of the boot file in the string format.
– DHCP options 3 (router), 6 (DNS) and 66 (TFTP server):
– All other DHCP options
4.4.15.4

Static Leases

On this page you specify that devices with a certain MAC address or client ID are assigned
to the selected IP address.
Description
The page contains the following boxes:
● "Pool ID" drop-down list
Select the required address band.
116
Enter the DHCP parameter as an IPv4 address, e.g. 192.168.100.2. With the
exception of DHCP option 3, you can specify several IPv4 addresses separated by
commas.
Enter the DHCP parameter in hexadecimal, e.g. the IPv4 address 192.168.100.2
corresponds to "C0A86402".
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02