Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 71

● Load
With this button, you can load files on the device. The button can be enabled, if this
function is supported by the file type.
● Save
With this button, you can save files from the device. The button can only be enabled if
this function is supported by the file type and the file exists on the device.
● Delete
With this button, you can delete files from the device. The button can only be enabled if
this function is supported by the file type and the file exists on the device.
Note
Following a firmware update, empty the cache of the Web browser.
Procedure
Loading files using HTTP
1. Start the load function by clicking the one of the "Load" buttons.
The dialog for loading a file is opened.
Note
Files whose access is password protected
To be able to load these files on the device successfully, you need to enter the password
specified for the file in "System" > "Load & Save" > "Password".
2. Go to the required file
3. Click the "Open" button in the dialog.
The file is now loaded.
4. If a restart is necessary, a message to this effect will be output.
Saving files using HTTP
1. Start the save function by clicking the one of the "Save" buttons.
2. You will be prompted to select a storage location and a name for the file. Or you accept
the proposed file name. To make the selection, use the dialog in your browser. After
making your selection, click the "Save" button.
Deleting files using HTTP
1. Start the delete function by clicking the one of the "Delete" buttons.
The file will be deleted.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Configuring with Web Based Management
4.4 "System" menu
71