4.5
"Interfaces" menu
4.5.1
Ethernet
4.5.1.1
Overview
The page shows the configuration for the data transfer for all ports of the device. You cannot
configure anything on this page.
Description
The table has the following columns:
● Port
Shows the configurable ports. The entry is a link. If you click on the link, the
corresponding configuration page is opened.
● Port Name
Shows the name of the port.
● Status
Shows whether the port is on or off. Data traffic is possible only over an enabled port.
● OperState
Displays the current operational status. The operational status depends on the configured
"Status" and the "Link". The available options are as follows:
– Up
– Down
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
You have configured the status "enabled" for the port and the port has a valid
connection to the network.
You have configured the status "disabled" or "Link down" for the port or the port has
no connection.
Configuring with Web Based Management
4.5 "Interfaces" menu
123