Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 46

Configuring with Web Based Management
4.3 "Information" menu
● Save entries with "Set Values"
WBM pages in which you can make configuration settings have a "Set Values" button at
the lower edge. The button only becomes active if you change at least one value on the
page. Click this button to save the configuration data you have entered on the device.
Once you have saved, the button becomes inactive again.
Note
Changing configuration data is possible only with the "admin" login.
Note
The changes take immediate effect. But it takes some time for the changes in the
configuration to be stored.
● Create entries with "Create"
WBM pages in which you can make new entries have a "Create" button at the lower
edge. Click this button to create a new entry.
● Delete entries with "Delete"
WBM pages in which you can delete entries have a "Delete" button at the lower edge.
Click this button to delete the previously selected entries from the device memory.
Deleting also results in an update of the page in the WBM.
● Page down with "Next"
The number of data records that can be displayed on a WBM page is limited. Click the
"Next" button to page down through the data records.
● Page up with "Prev"
The number of data records that can be displayed on a page is limited. Click the "Prev"
button to page up through the data records.
Logout
You can log out from any WBM page by clicking the "Logout" link.
46
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02