Severity Filter - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
● Syslog
The device writes an entry to the system log server. This is only possible if the system log
server is set up and the "Syslog client" function is enabled.
● Fault
The error LED lights up on the device.
● Digital Output
Controls the digital output or signals the status change with the "DO" LED.
● VPN Tunnel
Controls the VPN connection (establishment/termination).
Steps in configuration
1. Select the check box in the row of the required event. Select the event in the column
under the following actions:
– E-Mail
– Trap
– Log Table
– Syslog
– Fault
– Digital Output
– VPN Tunnel
2. Click the "Set Values" button.
4.4.5.2

Severity filter

On this page, you configure the severity for the sending of system event notifications.
78
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02