Failsafe Relay Specifications; Supported Networking Standards; Copper Ethernet Port Specifications - Siemens RUGGEDCOM M2100F Installation Manual

Chapter 5
Technical Specifications
Section 5.2

Failsafe Relay Specifications

Rated Switching Current
Maximum Switching Capacity
Section 5.3

Supported Networking Standards

Standard
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3ad
IEEE 802.1D
IEEE 802.1D
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1w
IEEE 802.1x
IEEE 802.1Q-2005
(formerly 802.1s)
Section 5.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
M2100F.
NOTE
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages.
26
Parameter
Max Switching Voltage
10 Mbps Ports 100 Mbps Ports
ü
ü
ü
ü
ü
ü
ü
ü
ü
2 A @ 240 VAC, 0.15 A @ 125 VDC, 2 A @ 30 VDC
1000 Mbps Ports
ü
ü ü
ü
ü
ü
ü ü
ü ü
ü ü
ü ü
ü ü
ü ü
ü ü
Installation Guide
Value (Resistive Load)
240 VAC, 125 VDC
150 W, 500 VA
Description
10BaseT/10BaseFL
100BaseTX/100BaseFX
Flow Control
1000BaseLX
1000BaseTx
Link Aggregation
MAC Bridges
Spanning Tree Protocol (STP)
Class of Service (CoS)
VLAN (Virtual LAN) Tagging
Rapid Spanning Tree Protocol (RSTP)
Port-Based Network Access Control
Multiple Spanning Tree Protocol (MSTP)
Failsafe Relay Specifications
RUGGEDCOM M2100F