I Auto Memory Write Scan - Icom IC-PCR1500 Instruction Manual

8
SCAN OPERATION

I Auto memory write scan

Auto memory write scan does the same as the programmed
scan and then writes paused signal frequencies into memory
channels of a specified memory bank. Scan edges must be
programmed in advance. (p. ??)
D Using the multi-function receiver screen or
component screen
qMake sure the squelch is set to the threshold point. (closed
condition)
wRight-click the [AUTO] button to call up the Auto MW Scan
setting screen if it is not displayed.
eEnter the programmed scan range number to be scanned
in [Program No].
rSelect a memory bank to be written, then click the close
([X]) button to close the setting screen.
• To clear the selected memory bank contents, click [All Clear].
53
tClick the [AUTO] button to start auto memory write scan.
• "AUTO Scan" blinks while scanning.
yTo stop the scan, click [STOP] or [AUTO].