I Auto Memory Write Scan - Icom IC-R5 Instruction Manual

6
SCAN OPERATION

I Auto memory write scan

This scan is useful for searching a specified frequency range
and automatically storing busy frequencies into memory
channels. The same frequency ranges used for program scan
are used for auto memory write scan.
q Select VFO mode with [V/M•S.MW•~].
wPush [MODE•SCAN] for 1 sec. to enter scanning type se-
lection condition.
e Rotate [DIAL] to select the desired scanning type.
• "ALL" for full scan; "BAND" for band scan, "PROGxx" for pro-
grammed scan (xx= 0 to 24; programmed scan edges numbers
only displayed)
r Push [MODE•SCAN] to start the scan.
tPush [V/M•S.MW•~] to turn the automatic memory write
function ON and OFF.
• " " indicator blinks.
[DIAL]
[V/M•S.MW•~]
[MODE•SCAN]
yPush [MODE•SCAN] to stop scan.
29
• During auto memory
write scan
FM P SKIP
" " indicator blinks dur-
ing auto memory write
scan.
D D During auto-memory write scanning:
• When signal is received, scan pauses and the frequency is
stored into auto memory write channel group (
- 2 short beeps sound when stored.
• Scan resumes after frequency storing.
• When all channels are stored, the scan cancels automati-
cally and 1 long beep sounds.
D D Re-calling the stored frequencies:
qPush [V/M•S.MW•~] to select memory mode.
wPush [BAND•
] several times, or while pushing
[BAND• ], rotate [DIAL] to select the auto memory write
channel group.
• "R" appears.
e Rotate [DIAL] to select the desired channel.
FM
"R" appears when auto memory
write channel group is selected.
D D Clearing the stored frequencies:
q Select the auto memory write channel group.
wWhile pushing [FUNC], push [V/M•S.MW•~] for 1 sec. to
clear the all channels contents.
• 1 short and 1 long beeps sound.
NOTE: The auto memory write channel contents CANNOT
be cleared by an independent channel. Thus it is good idea
to copy the contents into regular memory channel.
R 000– R 199).
R