Priority Watch; Priority Watch Types; Priority Watch Operation - Icom IC-PCR1500 Instruction Manual

9

PRIORITY WATCH

I Priority watch types
Priority watch checks for signals on the frequency every
5 sec. while operating on a VFO frequency or scanning. The
receiver has 2 priority watch types to suit your needs.
The watch resumes according to the selected scan resume
condition. See p. ?? for details.
NOTE: If the pocket beep function is activated, the receiver
automatically selects the tone squelch function when pri-
ority watch starts.
MEMORY CHANNEL WATCH
While operating on a frequency,
priority watch checks for a signal
on the selected memory channel
every 2 to 60 sec.
• A memory channel with skip infor-
mation can be watched.
57
5 sec.
VFO Memory
frequency channel
I Priority watch operation
D Using the multi-function receiver screen or
component screen
qSet the receive frequency. (pgs. ??, ??)
wRight-click the [PRIO] button to call up the Priority Scan
setting screen if it is not displayed.
eSet the watching channel in [Scan Channel].
rSet the watching interval from 2 to 60 sec in [Priority Inter-
val], then click the close ([X]) button to close the setting
screen.
t Click the [PRIO] button to start priority scan.
• "PRIO Scan" blinks while scanning.
• The receiver checks the memory channel according to the set-
ting interval.
• The watch resumes according to the selected scan resume con-
dition. (p. ??)
• While the watch is pausing, pushing [??] resumes the watch
manually.
y To stop the scan, click [STOP] or [PRIO].