Icom IC-PCR1500 Instruction Manual page 58

8
SCAN OPERATION
I Versatile memory scan
You can set the memory scan conditions using the Memory
Scan setting screen.
qRight-click the [MEMO] button to call up the Memory Scan
setting screen if it is not displayed.
wCheck the desired check boxes, then click the close ([X])
button to close the setting screen.
• When selecting the [SEL] box (select memory scan), only se-
lected memory channels ("SEL" setting is turned ON in memory
channel list screen) are scanned.
• When selecting the [SKIP] box (memory skip scan), skip chan-
nels ("SKIP" setting is turned ON in memory channel list screen)
are not scanned.
• When selecting the [MODE SEL] box (mode select memory
scan), only memory channels that receive mode setting are
matched to [Select Mode] selection as below are scanned.
55
eClick the [MEMO] button to start the desired memory scan.
rTo stop the scan, click [STOP] or [MEMO].
• All settings can be used simultaneously.
• SEL, SKIP and receive mode can be set in the memory
list screen.
• At least 2 memory channels must be programmed with
the desired condition for scan to proceed.