Auto Memory Write Scan - Icom IC-R6 Instruction Manual

Communications receiver
Hide thumbs Also See for IC-R6:
Table of Contents

Advertisement

■ Auto memory write scan

This scan is useful for searching a specified frequency
range, and automatically storing busy frequencies into
memory channels. The same frequency ranges used for a
program scan are also used for an auto memory write scan.
q Start a VFO scan.
➥ Push [V/M] to select the VFO mode.
➥ Set the squelch level.
➥ Hold down [SCAN](MODE) for 1 second to enter the
scan type selection mode.
➥ Rotate [DIAL] to select a desired scanning type.
• Select "ALL" for full scan, "BAND" for band scan, "P-LINK
x" for programmed link scan (x= 0 to 9), "PROGxx" for pro-
grammed scan (xx= 0 to 24; only programmed scan edge
numbers are displayed).
➥ Push [SCAN](MODE) to start the scan.
w Push [V/M] to turn the auto memory write function ON or
OFF.
• The "
" icon blinks.
• Push [SCAN](MODE) to stop the scan.
[DIAL]
During auto memory
write scan
The "
" icon blinks
during auto memory
write scan.
D During auto memory write scanning:
• When a signal is received, the scan pauses for approxi-
mately 5 seconds and the frequency is stored into an
auto memory write channel group (
- 2 short beeps sound when stored.
• The scan resumes after frequency storing.
• When all channels are stored, the scan automatically
stops and 1 long beep sounds.
D Re-calling the stored frequencies:
q Push [V/M] to select the memory mode.
w Push [BAND] repeatedly, or while holding down [BAND],
rotate [DIAL], to select the auto memory write channel group.
• "AW" appears.
e Rotate [DIAL] to select a desired channel.
D Clearing the stored frequencies:
q Select the auto memory write channel group.
w While holding down [FUNC], push and hold [S.MW](V/M)
for 1 second to clear all the channels' contents.
• 1 short and 1 long beep sounds.
NOTE: The auto memory write channel contents CANNOT
be cleared by an independent channel. Thus it is a good
idea to copy the contents into a regular memory channel.
SCAN OPERATION
AW
000–
AW
199).
"AW" appears when the
auto memory write channel
group is selected.
6
6
34

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-R6 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF