Icom IC-PCR1500 Instruction Manual page 55

D Starting a programmed scan
qMake sure the squelch is set to the threshold point. (closed
condition)
wRight-click the [PROG] button to call up the Program Scan
setting screen if it is not displayed.
eClick the [Program Scan] tab to show the program list.
rEnter the programmed scan range number to be scanned
in [Program No], then click the close ([X]) button to close
the setting screen.
tClick the [PROG] button to start programmed scan.
• "PROG Scan" blinks while scanning.
yTo stop the scan, click [STOP] or [PROG].
• When the frequency is changed after cancelling a scan and a
new scan is activated, scan starts from the starting frequency of
the specified frequency range. When the frequency is not
changed, scan starts from the previously stopped frequency.
SCAN OPERATION
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
52