Dtcs Polarity Setting; Pocket Beep Operation - Icom IC-PCR1500 Instruction Manual

10
TONE SQUELCH OPERATION
I DTCS polarity setting
As well as a code setting, the polarity setting is also available
for the DTCS operation. When a different polarity is set, the
DTCS never releases audio mute even when a signal with a
matching code number is received.
qClick [FM] to select FM mode.
wClick [DTCS] to turn the DTCS squelch ON.
• "DTCS" appears in the function display.
eRight-click [DTCS] to display the [DTCS] setting screen.
rSelect the DTCS polarity from "Normal" and "Reverse" in
[Polarity].
tClick the close button ([X]) to close the [DTCS] setting
screen.
61
I Pocket beep operation
This function uses subaudible tones for calling and can be
used as a "common pager" to inform you that someone has
called while you were away from the receiver.
qClick [FM] to select FM mode.
wClick [TSQL]/[DTCS] to turn the tone/DTCS squelch ON.
• "TSQL"/"DTCS" appears in the function display.
eRight-click [TSQL]/[DTCS] to display the [TSQL]/[DTCS]
setting screen.
rCheck the [P.Beep] check box to turn the pocket beep func-
tion ON.
" "
• appears in the function display.
tClick the close button ([X]) to close the [TSQL]/[DTCS] set-
ting screen.