Auto Memory Write Scan - Icom IC-RSOOCOL Instruction Manual

9-8 AUTO MEMORY WRITE
SCAN
@ AUTO MEMORY WRITE SCAN
OPERATION
® Push the group number,
OO onaaosS
@Push [AUTO].
AM MID BANK
108.000.00 soom
TS 25.0kuz
1P1 108,000.00 MHz
1P2 135,975.00 MHz
While operating auto memory write scan.
SCANNING Q
Once a frequency is written into a memory channel, the
frequency is not rewritten during scan operation,
2) Select the desired resume condition. See p. 46 Section
9-1 (3) SCAN RESUME CONDITION.
3) Adjust the [SQUELCH] contro! to the threshold point.
4) Enter the desired scan group number using a digit key.
If you do not enter a scan group number, the previous
scan group is used.
5) Push the [AUTO] switch to start auto memory write
scan,
Scan does not activate when the Programmed scan
edges are not programmed,