Auto Memory Write Scan - Icom IC-R6 Instruction Manual

Auto memory write scan

This scan is useful for searching a specified frequency
range, and automatically storing busy frequencies into
memory channels. The same frequency ranges used for a
program scan are used for an auto memory write scan.
q Start a VFO scan.
Push [V/M] to select the VFO mode.
Set the squelch level.
Hold down [SCAN](MODE) for 1 second to enter the
scan type selection mode.
Rotate [DIAL] to select a desired scanning type.
• Select "ALL" for full scan, "BAND" for band scan, "P-LINK
x" for programmed link scan (x= 0 to 9), "PROGxx" for pro-
grammed scan (xx= 0 to 24; only programmed scan edge
numbers are displayed).
Push [SCAN](MODE) to start the scan.
w Push [V/M] to turn the auto memory write function ON or
OFF.
• The " " icon blinks.
• Push [SCAN](MODE) to stop the scan.
SCAN OPERATION
[DIAL]
• During auto memory
write scan
The " " icon blinks
during auto memory
write scan.
6
6
32