Menu For Deleting Dbs - Siemens SIMATIC S5 Manual

S5-115F Manual
F2 Delete DB
Press the F2 softkey to call the Delete menu ( Figure 1-16).
I/O Delete
F1 PLC
F2
F3 FD
F4
F5
F6
F7
F8 RETURN
F1
PLC
The Delete routine can be used to delete individual DBs and successive DBs. The following
prompt appears in an input line when the function is selected:
"ENTER DB NUMBER(S):"
Use the following syntax when entering DB numbers:
number X
or
number X - number Y
Confirm the entry by pressing the EXEC key. To avoid inadvertent deletion, you will be asked
again:
"DELETE DB x" or "DELETE DB x TO DB y?"
The DBs specified will be deleted when you press the <Exec> key. The program then returns
to DB number input. Only configuration DBs can be deleted in this menu.
If you attempt to delete DB 1, you will be prompted to confirm the deletion:
"DELETE DB 1?"
DB 1 is deleted when you press the <Exec> key. All attempts to delete are cancelled with
the <Break> key. If DB 1 is missing, configuration DBs will not be recognized and therefore
not deleted.
EWA 4NEB 811 6149-02
PROGRAM FILE: A:@@@@@@ST.S5D
: Delete on PLC
:
: Delete on external memory
:
:
:
:
: Return to previous menu
F2 F3 F4
FD
Figure 1-16. Menu for Deleting DBs
Configuring with COM 115F
COM 115F / PDC15
F5 F6 F7 F8
RETURN
1-25