Siemens OpenAir GLB 1E Series Manual

Siemens OpenAir GLB 1E Series Manual

Air damper actuators
Hide thumbs Also See for OpenAir GLB 1E Series:

Advertisement

Quick Links

s
OpenAir™
Air damper actuators
GLB..1E
30
A6V10636202_enAP_c
2018-01-25
Electronic motor driven actuators for open-close, three-position
and modulating control
● Nominal torque 10 Nm
● Operating voltage AC 24 V ~ / DC 24...48 V ⎓ or AC 100...240 V ~
● Mechanically adjustable span between 0...90°
● Pre-wired with 0.9 m long connection cables
● Type-specific variations with adjustable offset and span for
the positioning signal
● Position indication: mechanical and electrical
● Feedback potentiometer
● Self-adaption of rotational angle range and adjustable auxiliary switches for
supplementary functions
Siemens
Building Technologies

Advertisement

Table of Contents
loading

Summary of Contents for Siemens OpenAir GLB 1E Series

  • Page 1 ● Pre-wired with 0.9 m long connection cables ● Type-specific variations with adjustable offset and span for the positioning signal ● Position indication: mechanical and electrical ● Feedback potentiometer ● Self-adaption of rotational angle range and adjustable auxiliary switches for supplementary functions A6V10636202_enAP_c Siemens 2018-01-25 Building Technologies...
  • Page 2: Technical Design

    The rotary angle of the shaft adapter can be limited mechanically with a set screw. Technical design Components The housing consists essentially of flame retardant, non brominated, non chlorinated glass fibre reinforced plastic. 2 / 10 Siemens A6V10636202_enAP_c Building Technologies 2018-01-25...
  • Page 3 Mounting instructions GDB..1E, GLB..1E A6V10636143_----_a Related documents such as environmental declarations, CE declarations, etc., can be down- loaded at the following Internet address: http://siemens.com/bt/download Notes Safety Caution National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage.
  • Page 4: Installation

    Nominal rotary angle (with position indication) 90° Maximum rotary angle (mechanic limitation) 95° ± 2° Runtime for 90° rotary angle 150 s Actuator sound power level 28 dB(A) C-UL: Permitted only to DC 30 V ⎓ 4 / 10 Siemens A6V10636202_enAP_c Building Technologies 2018-01-25...
  • Page 5 Degree of protection Insulation class As per EN 60730 AC 24 V ~ / DC 24…48 V ⎓, feedback potentiometer AC 100…240 V ~, auxiliary switches Housing protection IP 54 as per EN 60529 5 / 10 A6V10636202_enAP_c Siemens 2018-01-25 Building Technologies...
  • Page 6 Square 6…12.8 mm Min. shaft length 20 mm Shaft hardness <300 HV Weight Without packaging Max. 0.49 kg, without switches Max. 0.63 kg, with switches The documents can be downloaded from http://siemens.com/bt/download. 6 / 10 Siemens A6V10636202_enAP_c Building Technologies 2018-01-25...
  • Page 7: Internal Diagrams

    GLB1.. 1E (AC 24 V ~ / DC 24…48 V ⎓) Open-close, single wire control Open-close, two wire control Three-position control Modulating control Single Pole Single Throw (SPST) Single Pole Double Throw (SPDT) 7 / 10 A6V10636202_enAP_c Siemens 2018-01-25 Building Technologies...
  • Page 8: Cable Labeling

    Switch A normally closed contact grey/pink GY PK Switch A normally open contact black/red BK RD Switch B input black/blue BK BU Switch B normally closed contact black/pink BK PK Switch B normally open contact 8 / 10 Siemens A6V10636202_enAP_c Building Technologies 2018-01-25...
  • Page 9: Revision Numbers

    Dimensions min. 60 Dimensions in mm Revision numbers Type Valid from rev. no. Type Valid from rev. no. GLB141.1E GLB164.1E GLB142.1E GLB166.1E GLB146.1E GLB361.1E GLB161.1E GLB341.1E GLB163.1E GLB346.1E 9 / 10 A6V10636202_enAP_c Siemens 2018-01-25 Building Technologies...
  • Page 10 Issued by © Siemens Switzerland Ltd, 2016-2018 Technical specifications and availability subject to change without notice. Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 41-724 24 24 www.siemens.com/buildingtechnologies Document ID A6V10636202_enAP_c Issue 2018-01-25...

Table of Contents