Siemens SIMATIC S5 Manual page 11

S5-115F Manual
Courses
Siemens provide SIMATIC S5 users with extensive opportunities for training.
For more information, please contact your Siemens representatives.
Reference Literature
This manual is a comprehensive description of the S5-115F programmable controller. Topics not
specific to the S5-115F, however, are only briefly dealt with. You will find more detailed in-
formation in the following literature:
•
Automating with the S5-115U
SIMATIC S5 Programmable Controllers
Hans Berger
Siemens AG, Berlin and Munich 1987
Contents:
- STEP 5 programming language
- Program scanning
- Integral program blocks
- Interfaces to the I/Os
Order No.: ISBN 3-8009-1484-0
You will find information on the range of controllers and programmers in the following catalogs:
• ST 52.3 "S5-115U Programmable Controller"
• ST 57 "Standard Functions Blocks and Driver Software for Programmable Controllers of
the U Range"
• ST 59 "Programmers"
• ET 1.1 "ES 902 C 19 in. Packaging System"
• MP 11 Thermocouples, Compensation Boxes
Further components and modules (e.g. CPs and SINEC L1) have their own manuals. We will refer
you to these sources at the appropriate points in the text.
EWA 4NEB 811 6149-02
Introduction
xiii