F1: Initialize Operating System; The Com 115F Main Menu - Siemens SIMATIC S5 Manual

S5-115F Manual
F6 (EXEC) Declares the selected and displayed parameters to be valid and calls the next
menu.
Exec key The Exec key has the same function as the F6 (EXEC) key.
Break key The programmer rejects the parameter just entered or changed. The pro-
grammer displays the Defaults form with the basic settings again.
With the COM 115F software package version 3.2, you can configure programmable controllers
with the 942-7UF11, 942-7UF12, 942-7UF13, 942-7UF14 and 942-7UF15 central processing units.
For this reason, check the CPU identifier specified in the Default.
If you are not yet familiar with the terms from the Defaults form, please read the explanation of
terms in your programmer manual.
Complete the Defaults form and confirm the entries with the F6 key.
You are now in the COM 115F MAIN MENU. If you now press the <HELP> key, the following form
appears on the screen ( Figure 1-3).
COM 115F Main menu
F1 BESY
F2 COMMUN
F3 I/O
F4 PLC FCT
F5 DIAGNOSTICS :
F6 DEFAULT
F7 SYSHAN
F8 RETURN
F1
BESY COMMUN
Note
If you want to process parameters already set, you must first load the program file from
the diskette or the hard disk with the system handling menu.
EWA 4NEB 811 6149-02
: Initialize operating system
: Initialize communications
: Configure I/O modules
: Call PLC functions (RUN/STOP)
Call diagnostics functions
: Call defaults screen form
: System handling
: Exit COM 115F CONFIGURE
F2 F3 F4
I/O PLC FCT
Figure 1-3. The COM 115F Main Menu
Configuring with COM 115F
F5 F6 F7
DIAG DEFAULT SYSHAND
F8
RETURN
1-7