S5-115F Manual
1
Configuring with COM 115F
COM 115F is a software package for
•
Configuring your S5-115F programmable controller
•
Documenting that part of your system that is subject to official acceptance tests
•
Error diagnostics with error display in plaintext
•
System handling.
COM 115F is supplied on two diskettes that can be used on your programmer.
Supplied as
1 5 " diskette
1 3 " diskette
The diskettes contain the following files:
File name
S5PEC15X.CMD
S5PED15X.CMD
S5XEF01X.DAT
S5XEF02X.DAT
S5XEF04X.DAT
S5XEF03X.DAT
FB115FST.SSD
COMF.CMD
DRUF.CMD
S5CR59ST.S5D
EWA 4NEB 811 6149-02
Table 1-1. COM 115F Diskettes
PG 635 / PG 720 / PG 710 / PG 730 / PG 740
Table 1-2. COM 115F Files
Program for configuring the S5-115F
Program for documenting the part of the system subject to
official acceptance tests
Text file with messages for error diagnostics
Texts which support you in configuring your system
Error texts to inform you of faults in the memory submodules
Screen forms for printing out your configurations
Block headers for S5-115F-specific function blocks
(for off-line programming)
COM 115F CONFIGURE package call from the command line
level under Personal CP/M-86
COM 115F DOCUMENT package call from the command line
level under Personal CP/M-86
Program file with standard error message texts for the
memory submodule in the CP 523 communications processor
Configuring with COM 115F
Programmer
PG 685 / PG 695 / PG 750 /PG 770
Brief description
1-1