Siemens SIMATIC S5 Manual page 324

PLC Error Messages
Error Con-
Error Message Text
Identi- sec.
fier No.
Progr.
106 01
PG operator DB too long
(>4068 bytes):
Handling error
Additional info. 1:
DB No.
Additional info. 2:
DB length
106 02
DB does not belong in user
RAM: Handling error
Additional info. 1:
DB No.
Additional info. 2:
DB length
B-64
Possible Cause
Error group No. 16
No. of the PG operator DB,
decimal display
Length of PG operator DB in byte,
hex display
Error group No. 16
- RAM requirement of user system
greater than available RAM
No. of the PG operator DB,
decimal display
S5-115F Manual
Remedy
- Shorten PG operator DB
(<= 4068 bytes)
Warm restart:
1. Stop/Run
- Reduce RAM requirement of
user system
- Enlarge RAM in test
operation: max. size of RAM
submodule equal to user
EPROM in safety mode
- Reduce RAM requirement of
user system in safety mode
Warm restart:
1. Stop/Run
EWA 4NEB 811 6149-02