Sensor Systems - Thermo Scientific HAAKE RotoVisco 1 Instruction Manual

Sensor Systems

12. Sensor Systems
Immersion Disc
ISO 2555
Immersion Cylinder
ISO 2555
The measurement sensors are the core of a Rheometer and
determine the quality of the measuring results.
Coaxial Cylinder
The appropriate literature mentions a variety of sensor sys-
DIN 53018
tems which can be classified as follows:
a. Cylinder Sensor Systems
Coaxial Cylinder
DIN 54453
b. Cone-Plate / Plate-Plate Sensor Systems
Coaxial Cylinder
DIN 53019
Out of these numerous possibilities, Thermo Fisher
Scientific supplies the following systems:
Cone-Plate
Combinations
Plate-Plate
Combinations
These sensors cover the majority of desired applications
whereby special sensor systems are developed and made
available in close cooperation with customers requiring such
special sensor systems.
!
Make sure that the unit has been switched off
before you connect or disconnect the cables. This
is to avoid electrostatic charging resulting in a
defect of the electronic circuit boards.
When unscrewing the rotor from the measuring shaft it
should be ensured that the rotor is removed from the
cone with small rotational motions.
Not use and store the plate and cone measuring geo-
metry with ceramic shaft in steel execution in the proxi-
mity of a magnetic field, since these can be magnetized.
The results of measurement are incorrect in this case.
-- Immersion Disc ISO 2555
-- Immersion Cylinder ISO 2555
-- Coaxial Cylinders according to DIN 53018
-- Coaxial Cylinders according to DIN 54453
-- Coaxial Cylinders according to DIN 53019/ISO 3219
-- Cone-Plate with various opening angles and radii
-- Plate-Plate with various radii and gap widths
-- Cylinder systems according to ISO 2555 (optional)
-- Cylinder systems according to DIN 53019/ISO 3219
-- Cylinder systems according DIN 54453
-- Cylinder systems according DIN 53018
-- Cone-Plate combinations
-- Plate-Plate combinations
-- Vane (star-shaped) rotors for special measurements
-- Optically transparent sensors (cylinder, cone-plate
and plate-plate)
78