Unit Description - Thermo Scientific HAAKE RotoVisco 1 Instruction Manual

Unit Description

7. Unit Description
lntroduction
The viscoelastic behavior of a fluid or a soft solid can be char-
acterized in two ways; either the fluid is deformed and the re-
sulting stress is measured (CR mode), or the stress is ap-
plied and the deformation monitored (CS mode). The princi-
ple benefits of the CS mode are:
Software
Software control and evaluation with HAAKE RheoWin or
OS1 to program the display unit for production laboratories.
Measurements and evaluation
The Rheometers is controlled either by the HAAKE Rheo-
Win Software or with one of 10 pre--programmable mea-
suring procedures by the display unit. The results are avail-
able for further processing on a PC with the HAAKE Rheo-
Win Software. Alternatively up to 50 measurements can be
stored internally and be evaluated, displayed or printed out
for documentation purposes.
Sensors
For HAAKE RotoVisco1 and HAAKE RheoStress1 plates,
cones, coaxial cylinders and immersion systems are avail-
able.
16