Thermo Scientific HAAKE RotoVisco 1 Instruction Manual page 53

Operating
After the selection of the measuring device, the sensor and
a temperature control unit are selected. If no temperature
control unit is selected, no temperature control can take
place. No selection (--------)also means that the temperature
control unit is switched off.
The measuring process is now composed according to the
requirements of the application or of the user just as in the
PC mode. There are some restrictions of the length of names
and the selection of elements. These restrictions are visible
only at editing.
After the drawing up of a JOB it can directly be started for a
test or it can be uploaded to the measuring device. On this
51