LANGUAGE
German
Spanish
English
French
MENU
Configuration
Operator
Jobs
Sample name
Batch ID
Lift
LIFT
Open
Together
Measurement
Stop
Operating
Language
204
Menu
Status
Measure
The measurement sequence as a whole is described under
110
"Measuring sequence".
Lift
LIFT activation takes place in MENU by pressing the key.
More
Status
Pressing the key leads directly into the submenu:
OPEN
-- The lift raises to the top position and stops there
110
(cleaning position).
Contact
CONTACT
Sensor
-- The lift moves down to the contact point (zero point)
-- and then up again to the cleaning position with status
Menu
message reporting successful zero point determination.
Status
TOGETHER
-- The lift runs max. (if STOP is not actuated before) to
the contact point and stops there.
STOP
-- Stops the lift immediately.
MEASURING POSITION
-- Runs from the current position (usually the cleaning
position) to the measuring position.
41