Thermo Scientific HAAKE RotoVisco 1 Instruction Manual page 45

MENU
Configuration Operator
Jobs
Sample name
Lift
Batch ID
BATCH ID
ID: ABC87--D2/F
ABCDEFGHIJKL MNOPQRSTUVW
up
MENU
Configuration Operator
Jobs
Sample name
Lift
Batch ID
JOBS
Snap-shot test Polyethyl. Creep
Manual Measurement
Linearitätstest
Aushärtungstest
Multiwave
Übersicht ausdrucken
MEASUREMENT DEFINITION
Methode:
Sensor: Batch ID:
Multiwave:
Sample number
Start test
Operating
Batch ID
010
In MENU activate BATCH ID by pressing the key.
More
Status
Pressing the key leads directly into the submenu:
125
-- Batch ID must be entered on the display unit.
down
Menu
Status
Measuring sequence
In MENU activate MEASURE by pressing the key.
010
More
Status
Pressing the key leads directly into the submenu:
(The names of the jobs are defined by the user in the Rheo-
105
Win--Software.)
"Snap--Shot Test" and "Manual measurement" are perma-
nently assigned.
More
Menu
Status
Pressing a key leads directly to the "Measurement definition
210
screen".
Sample
-- If all specifications are correct, the operator can press
"START TEST".
Menu
Status
43