Thermo Scientific HAAKE RotoVisco 1 Instruction Manual page 46

TEST RUN
Stop JOB
Stop element
TEST STOP
Lift
Start test
Operating
-- After the operator has started the measurement, the job
320
starts and the display shows the predefined online form.
-- The operator waits until the job is completed or disconti-
nues the job or the current element (jumps to the next ele-
ment).
On completion or discontinuation of the job, the following dis-
play appears:
Status
The operator sees the results of the job on the display and
has 3 options for continuing:
321
Insert new sample: Press LIFT (lower lift), display No.
1
110 appears, replace old sample with new one and
then continue.
Next measurement (same job) with same sample but
2
Menu
possibly other parameters:
Status
Press START NEW MEASUREMENT. Any existing pa-
rameter place holders of this job are shown again for
editing.
General continuation of operation of the instrument via
3
MENU.
44