Unit Description
7.2 HAAKE RheoStress1
Flow curves
in CR and CS mode can be recorded as ramp or steps
(steady state).
Time curves
for reactions (e.g. curing) at constant temperature, shear
rate, shear stress or frequency.
Temperature programs
are software controlled to determine the temperature depen-
dence with controlled shear stress, shear rate or frequency.
Yield points
can be determined with creep/recovery tests or with stress
controlled ramps.
Viscoelasticity
of a fluid can be quantified by a creep/recovery test or by dy-
namic measurements in CD (Controlled Deformation) or CS
(Controlled Stress) mode.
Multiwave
even allows the determination of the frequency spectra as a
function of time or temperature by overlay within shortest
time.
18