Wiring Of Add-On Cassette Terminal Block - Panasonic AFPX-C30R User Manual

5.8 Wiring of Add-on Cassette Terminal Block

A screw-down connection type for terminal block is used for the add-on cassette. The suitable wires are
given below.
Suitable wires (twisted)
Size
AWG #28 to 16
Pole terminal with a compatible insulation sleeve
If a pole terminal is being used, the following models manufactured by Phoenix Contact Co. should be
used.
Cross-sectional
Manufacturer
0.25
0.34
0.50
Phoenix
Contact Co. 0.75
1.00
0.5×2
Pressure welding tool for pole terminals
Manufacturer
Phoenix Contact Co.
For tightening the terminal block
When tightening the terminals of the terminal block, use a screwdriver (Product No. 1205037) with a
blade size of 0.4 × 2.5 (Part No. SZS 0,4×2,5).
The tightening torque should be 0.22 to 0.25 N･m.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Nominal cross-sectional area
0.08 to 1.00 mm
2
area (mm )
AWG #24
AWG #22
AWG #20
AWG #18
AWG #18
AWG #20 (for 2 pHs)
Part No.
CRIMPFOX UD6
2
Size
With
insulating sleeve
AI 0, 25-6 BU
Product No.
1204436
Part No.
Without
insulating sleeve
-
- A 0, 34-6
- A 0, 5-6
- -
- -
- -