Expansion Method - Panasonic AFPX-C30R User Manual

3.1 Expansion Method

Two types of expansion method are available for the FP-X.
1. Installs the FP-X expansion unit or FP0 expansion unit (expansion FP0 adapter) using the
expansion cable.
2. Installs the add-on cassette to the cassette mounting part of the FP-X control unit.
3.1.1 Expansion Using the Expansion Cable
For the FP-X, the FP-X expansion unit and the FP0 expansion unit (expansion FP0 adapter AFPX-EFP0
is necessary) can be used by using the exclusive expansion cable.
Note: Only one expansion FP0 adapter can be installed at the last position of the FP-X expansion
bus. (It should be installed at the right hand side of the AFPX-E16 and E30.)
Up to seven FP-X expansion I/O units can be also installed between the control unit and
the expansion FP0 adapter. However, there are restrictions on E14/E16.
Reference: <1.3.1 Restrictions on FP-X Expansion Unit>
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com