Available retry counts
This is the number of times that you can input the password in succession. Every time incorrect
password is input, the number will decrease (up to 3 times).
If you fail to input the correct password for 3 times in succession, you cannot access the
program.
Turn the power supply of the FP-X off and then on again to try to input the password again.
Note:
If the power supply of the PLC is turned on/off with the setting that the access is allowed, the setting will
be that the PLC is protected again.
Setting the Password protect function
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
As the dialog box is shown, select as below.
Digit number:
Select "4 digits" or "8 digits".
Operation Mode:
Select "Protect".
4 digits (or 8 digits) password:
Input a password to be set.
Click "Settings".
Input the password for confirmation again, and
click [OK].
The setting has completed.