Panasonic AFPX-C30R User Manual page 330

Hide thumbs Also See for AFPX-C30R:

Table of Contents

High-speed counter/pulse output control flag area of FP-X Ry type

High-speed counter control code monitor area

High-speed counter

Elapsed value write and read instruction (F1)

• This instruction changes or reads the elapsed value of the high-speed counter.

• Specify this instruction together with the special data register DT90300.

• The elapsed value is stored as 32-bit data in the combined area of special data registers DT90300 and

• Use this F1 (DMV) instruction to set the elapsed value.

Example 1: Writing the elapsed value

Example 2: Reading the elapsed value

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Control code monitor area

FP-X Ry type

Set the initial value of K3000 in the high-speed

Read the elapsed value of the high-speed

counter and copies it to DT100 and DT101.

• The area DT90052 for writing channels

and control codes is allocated as shown in

the left figure.

• Control codes written with an F0 (MV)

instruction are stored by channel in

special data registers DT90360 to

Note) In the reset input setting, the reset

input (X102 or X202) allocated in the

high-speed counter setting of the

system registers are defined to

"enable/disable".

FP-X Tr type

Show Quick Links

Table of Contents

Troubleshooting