Password Protect Function - Panasonic AFPX-C30R User Manual

11.2 Password Protect Function

This function is used to prohibit reading and writing programs and system registers by setting a
password on the FP-X.
There are two ways to set a password as below.
1. Sets using the programming tool.
2. Sets using an instruction (SYS1 instruction).
Note: Precautions on the password setting
Do not forget your password. If you forget your password, you cannot read
programs. (Even if you ask us for your password, we cannot crack it.)
11.2.1 Password Setting
Setting using FPWIN GR
1. Select [Online Edit Mode] under the [Online] on the menu bar, or press the [CTRL] and [F2] keys at
the same time, to switch to the [Online] screen.
2. Select or "Set PLC Password" under "Tool" on the menu bar. The following display will be shown.
Security information dialog box
Confirmation the contents of the password setting
Confirm the settings indicated in the dialog box.
Current status
Indicates the current status of the password setting. There are following five statuses.
1. Password is not set
2. 4 digits Protect
3. 4 digits Available to access : Password is 4-digit password, and access is allowed.
4. 8 digits Protect
5. 8 digits Available to access : Password is 8-digit password, and access is allowed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
○
1
○
2
○
3
○
4
○
5
: Password is not set.
: Password is 4-digit password, and access is prohibited.
(The status that inputting the password completes and that can access
programs.)
: Password is 8-digit password, and access is prohibited.
(The status that inputting the password completes and that can access
programs.)
Indicates the current status of the password
setting.
Specify the type of the password to be used.
Specify an operation mode.
Access: Accesses programs by inputting a
password.
Protect: Sets a password.
Unprotect: Releases the password setting.
Input a password.
Optional setting for FP memory loader
Use the FP-X V2.5 or later and FPWIN GR
V2.8 or later, and set it to download to the FP
memory loader (Ver2.0 or later).