Wiring
3.1 Wiring of Terminal Block
Suitable solderless terminals/wires
M3 terminal screws are used for the terminal. The following suitable solderless terminals are
recommended for the wiring to the terminals
Suitable solderless terminals
Manufacturer
J.S.T. Mfg Co., Ltd.
Suitable wires
Suitable wires
2
AWG22 to 14 (0.3 mm
to 2.0 mm
Connection to the terminal block
Remove the terminal block before beginning the wiring operations. To remove the terminal
block, push downward the release lever located at the top of the terminal block.
NOTE
•
Install the terminal block by inserting it all the way to its original position
and pressing the lock button on the bottom of the unit. Then confirm that
the terminal block is securely attached and cannot be removed.
3-2
Shape
Part no.
Round type
1.25-MS3
Fork type
1.25-B3A
Round type
Fork type
Tightening torque
2
)
0.5 to 0.6 N·m
<Bottom of unit>
Suitable wires
0.25 to 1.65 mm
2-MS3
1.04 to 2.63 mm
2-N3A
Lock button
2
2