Table Of Error Codes - Panasonic AFPX-C30R User Manual

17.4 Table of Error codes

Difference in ERROR display
There are differences in the way errors are displayed depending on the model.
Model
FP1,FP-M,FP2,FP3,FP10SH
FPΣ,FP0, FP0R, FP-X
FP-e
Error Confirmation When ERROR Turns ON
When the "ERROR" on the control unit (CPU unit) turns on or flashes, a self-diagnostic error or syntax
check error has occurred. Confirm the contents of the error and take the appropriate steps.
-Error Confirmation Method
Procedure:1.Use the programming tool software to call up the error code.
By executing the "STATUS DISPLAY", the error code and content of error are displayed.
2.Check the error contents in the table of error codes using the error code ascertained above.
-Syntax check error
This is an error detected by the total check function when there is a syntax error or incorrect setting
written in the program. When the mode selector is switched to the RUN mode, the total check function
automatically activates and eliminates the possibility of incorrect operation from syntax errors in the
program.
When a syntax check error is detected
-ERROR turns on or flashes.
-Operation will not begin even after switching to the RUN mode.
-Remote operation cannot be used to change to RUN mode.
Clearing a syntax check error
By changing to the PROG. mode, the error will clear and the ERROR will turn off.
Steps to take for syntax error
Change to the PROG. mode, and then execute the total check function while online mode with the
programming tool connected. This will call up the content of error and the address where the error
occurred.
Correct the program while referring to the content of error.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Display
LED ERROR.
LED ERROR/ALARM
Screen display ERR.
Display method
Continually lit
Flashes/continually lit
Continually lit