Input Specifications - Panasonic AFPX-C30R User Manual

2.3 Input Specifications

2.3.1 Relay (Ry) Type
Input Specifications (For C14R/C30R/C60R control units)
Item
Insulation method
Rated input voltage
Operating voltage range
Rated input current
Input points per common
Min. on voltage/Min. on current
Max. off voltage/Max. off current
Input impedance
Response time
Operating mode indicator
EN61131-2 Applicable type
Note) this specification is applied when the rated input voltage is 24 V DC and the temperature is 25 °C.
Circuit diagram
Limitations on number of simultaneous input on points
Reference: <2.5 Limitations on Number of Simultaneous Input/Output On Points>
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Optical coupler
24V DC
21.6 to 26.4V DC
Approx. 4.7 mA (for control units X0 to X7)
Approx. 4.3 mA (from control unit X8 )
8 points/common (C14R)
16 points/common (C30R/C60R)
(Either the positive or negative of the input power supply can be
connected to common terminal.)
19.2 V DC/3 mA
2.4V DC/1 mA
Approx. 5.1 kΩ (for control units X0 to X7)
Approx. 5.6 kΩ (from control unit X8 )
For control units X0 to X7:
0.6 ms or less: normal input
50 µs or less:
off→on
From control unit X8 :
0.6 ms or less
on→off Same as above
LED display
TYPE3 (however, according to the above specifications)
For X0 to X7: R1=5.1 kΩ R2=3 kΩ
From X8:
Description
high-speed counter, pulse catch, interrupt
Note)
input settings
R1=5.6 kΩ R2=1 kΩ