5.7 Wiring of Terminal Block
Supplied terminal block/Suitable wires
M3 terminal screws are used for the terminal. The following suitable solderless terminals are
recommended for the wiring to the terminals
Suitable solderless terminals
Manufacturer
JST Mfg. Co., Ltd.
Suitable wires
Suitable wires
AWG22 to 14
The tightening torque should be 0.5 to 0.6 N・m
Connection to the terminal block
When using the round type terminal, remove the terminal cover.
Note:
Install the terminal block cover as it was after wiring to prevent electric shock.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Shape
Round type
Fork type
Round type
Fork type
Tightening torque
2
0.3 to 2.0 mm
Part No.
Suitable wires (mm
1.25-MS3
1.25-B3A
2-MS3
2-N3A
2
)
0.25 to 1.65
1.04 to 2.63