Panasonic AFPX-C30R User Manual page 328

Count for reset input: only for pulse I/O cassette
(Incremental input mode)
The reset input is executed by the interruption at (1) on (edge)
and (2) off (edge).
(1) on (edge) ... Count disable, Elapsed value clear
(2) off (edge) ... Count enable
DT90052 (bit2): "able/disable" setting of the input can be set
by the reset input.
10.3.3 Minimum Input Pulse Width
For the period T (1/frequency), a minimum input pulse width of T/2 (single-phase input) or T/4 (two-
phase input) is required.
<Single phase> <Two-phase>
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com