Note1) These current consumption indicate the increased amount of the current consumption of the
Control unit (refer to the example of the calculation below).
Note2) The current consumption of E30 is the current consumption at the supply terminal of E30. The
current consumption of the control unit does not increase.
Expansion FP0 adapter
[Example of calculation] (when 100 V AC)
C30R
+
IN8
410 mA
10 mA
Total 495 mA or less (100 V AC)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Unit type
AFPX-EFP0
+
TR8
+ E16R
10 mA
65 mA
Current consumption
+
EFP0
10mA + Current consumption of FP0
expansion unit
10mA + Current consumption of FP0
expansion unit (24V DC)
Example: When one FP0 expansion unit
(FP0-E32T) is connected:
FP0 expansion adapter: 10 mA or less
+ FP0-E32T: 40 mA or less
⇒ total 50 mA or less
24 V DC
10 mA or less