Event Tables - Mitel Aastra 470 System Manual

Operation and Maintenance
Parameter 1 (XXYY)
Value Reason (XX)
08 E-mail attachment not found
09 Invalid host, domain or IP address on
the communication server
10 E-mail text too long (body)
11 E-mail attachment too large
12 Format of e-mail attachment not
supported
13 No e-mail recipient address
14 Invalid e-mail recipient address
15 Invalid e-mail sender address
1)
Action carried out by the SMTP client at the point when the error occurred.
6. 6. 1. 2

Event tables

Event tables ( =f4)list all the event messages the system is capable of generating
(see Tab. 96).
There are 6 event tables. After a first start, all event tables are assigned at least one
destination. This assignment can be modified in the
view. Each event table can be configured individually. This means it is possible with
a filter to decide which event message – if any – should be sent to a particular sig-
nal destination either immediately, with a delay or not at all.
• No event:
This type of incoming event messages are
• Every event:
This type of incoming event messages are
• Custom:
With this setting, you can determine how often the event message may appear
for each period, until they are sent to the linked destination.
The Frequency of an event message may range between 2 and 20. The
244
Parameter 2:
1)
Action (YY) E-mail client
End data transmission
Prepare authentication
(LOGIN)
User name authentica-
tion (LOGIN)
Password authentica-
tion (LOGIN)
Authentication (PLAIN)
Prepare encrypted
authentication (CRAM-
MD5)
Encrypted authentica-
tion (CRAM-MD5)
Preparing to send next
e-mail
Message destinations
never sent to the linked destination.
all sent to the linked destination.
Parameter 3:
Additional info
depending on the
e-mail client
(XXYY)
( =h1)
Period is
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014