Auerswald COMpact 5000 Instructions Manual page 59

If the terminals and the PBX have a short distance
to each other, connect a single COMfortel 1200/
1400/1600/2600 system telephone directly to the
RJ-45 socket of the internal U
ISDN terminals or two system telephones per port
you require a U /S
P0 0
If the distance between PBX and terminal is greater,
lay the lines fixed at the terminal clamps of the
internal U port.
P0
Caution: Terminals integrated in the wall sockets are destroyed and can damage the
device.
• Contrary to the S
already integrated in the terminals (COMfortel 1100/1500/1600/2500/2500 AB/2600 or
U /S Adapter).
P0 0
• Remove terminals which have already been integrated in the wall sockets for use at the
U port.
P0
Note: You do not need an ISDN wall socket if you use a U
Adapter can be mounted on the wall or it can be connected to the PBX via the two screw
terminals on the back.
COMpact 5000/5000R - Firmware V6.8 - Instructions V04 04/2017
port. For all other
P0
Adapter.
port, do not equip a line at the U
0
internal U port
P0
IAE/UAE8
port with terminals. These are
P0
/S Adapter. The U
P0 0
Installation
/S
P0 0
59