Connecting The Pc; Turning On The Pbx; First Setup - Auerswald COMpact 5000 Instructions Manual

First Setup

Connecting the PC

Requirements:
• Available network socket on the PC or in the network of the PC
1. Insert one end of the accompanying network cable into the network
socket on the PC or in the network of the PC.
2. Insert the other end of the network cable into the RJ-45 socket of the
CPU module.

Turning on the PBX

Warning: Touching voltage-carrying conductors or telephone connections can cause
life-threatening electric shocks.
• Close the casing before you put the PBX into operation.
Note: If you have a USB memory stick with a configuration for automatic loading
(auconfig.cfg), insert it into the USB socket (USB host) of the CPU module before you switch
on the PBX. The configuration data stored on the USB memory stick will automatically be
saved to the PBX after switching on. The PBX restarts afterwards.
Requirements:
• PBX connected to earthing and casing closed
Connect the PBX to a freely accessible Schuko socket.
The Power and Status LEDs light up several seconds/minutes in
red and orange.
When the LEDs light up in green, the PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has occurred. Please contact
your dealer or the manufacturer directly.
First Setup
Warning: Incomplete or incorrect configuration can be hazardous to people, if for
example emergency calls cannot be performed.
• The configuration of the product is made via an integrated web server whose pages are
called via web browser. The user interface of the web server (Configuration Manager) is
available in English and German. If you are not familiar with these languages and the
technical terms, please consult a specialist who is linguistically and professionally
qualified.
50
COMpact 5000/5000R - Firmware V6.8 - Instructions V04 04/2017