Uv 105 Power Supply Unit - HEIDENHAIN TNC 410 M Technical Manual

2.3.7 UV 105 Power Supply Unit

2 – 28
The power supply for the main computer and controller
unit—and therefore also for the connected encoders—is
usually covered by the compact inverter or the power
supply unit of the modular inverter systems.
If several encoders with a high current consumption
(e.g. encoders with EnDat interface) or a dual-processor
control with a UE 2xx B compact inverter are connected,
however, an additional power supply source might
become necessary. The UV 105 power supply unit is
used for this purpose.
The UV 105 is connected to the control via a ribbon cable
and a 5-V terminal.
The cover for the cable is included in the items supplied.
Specifications
Power supply
Load capacity (5 V)
Power consumption
Degree of protection
Module width
Weight
ID
Connection overview
Connection
Dimensions
HEIDENHAIN Technical Manual for Inverter Systems and Motors
UV 105
UV 105
400 V~ ± 10%
50 Hz to 60 Hz
20 A
Approx. 200 W
IP 20
50 mm
4 kg
344 980-xx
Page 5–28
Page 4–30, Page 4–31, Page 5–65
Page 5–77