Trained Personnel; Meaning Of The Used Symbols - HEIDENHAIN TNC 410 M Technical Manual

4.2 General

4.2.1 Trained Personnel

4.2.2 Meaning of the Symbols Used
January 2008
Warning
Keep the following in mind during mounting and electrical installation:
National regulations for power installations
Interference and noise immunity
Operating conditions
Mounting attitude
In the "Technical Manual for Inverters and Motors," "trained personnel" means
persons who are familiar with the installation, mounting, commissioning and
operation of HEIDENHAIN inverter systems and motors. Furthermore,
electrical engineering work on the system may be carried out only by trained
electrical engineering technicians or persons trained specifically for the
respective application.
Basically, persons who perform work on HEIDENHAIN inverter systems and
motors must meet the following requirements:
They must have been trained or instructed in the standards of safety
engineering.
They must be familiar with the use of appropriate safety equipment
(clothing, measuring systems).
They should be skilled in first-aid practice.
Danger
Failure to comply with this information could result in most serious or fatal
injuries, and/or in substantial material damage.
Warning
Failure to comply with this information could result in injuries and
interruptions of operation, including material damage.
Note
Tips and important information about standards and regulations as well as
for better understanding of the document.
General
4 – 3