HEIDENHAIN TNC 410 M Technical Manual page 3

1 Update Information No. 1
1.1 Compact Inverters
1.2 Modular Inverters
1.3 Motors
April 2000
New compact inverters
• UE 211B: Continuous load on axes: 2 x 7.5 A; 1 x 15 A
Continuous load on spindle: 20 A
• UE 241B: Continuous load on axes: 2 x 7.5 A; 1 x 23 A
Continuous load on spindle: 31 A
New connections on the bottom of the UE 2xxB compact inverter. These
connections are reserved for future applications and must not be wired.
New sliding switch on the front of the UE 2xxB compact inverter. This
enables the spindle unit of the compact inverters to be used as an axis.
New UV 120 regenerative power supply unit with KDR 120 commutation
reactor
UV 120: DC-link full-load power: 22 kW
New line filters for UV 120 and UV 140
Note the dimensions of the new line filter!
New UP 110 braking resistor module
The UP 110 braking resistor module is required so that, if the power supply
from the UV 120 and UV 140 power supply modules fails, the braking energy
from the motors can be dissipated.
New synchronous motors QSY 96G, QSY 112D, the QSY 116 series, and
QSY 155
Designation
QSY 96G
QSY 116C
QSY 116E
QSY 116J
QSY 155A
QSY 155B
QSY 155D
QSY 155F
QSY 112D
New QAN 164B asynchronous motor
• Rated speed n : 1350 rpm
N
• Power rating P : 31.5 kW
N
This Technical Manual lists the input values for the machine parameters of
the current controller of the TNC and MANUALplusM for HEIDENHAIN
motors.
Update Information No. 1
Stall torque M
0
5.2 Nm
5.2 Nm
7.2 Nm
10.0 Nm
8.3 Nm
12.2 Nm
21.6 Nm
26.1 Nm
72.0 Nm
Rated speed n
N
4500 rpm
3000 rpm
3000 rpm
3000 rpm
3000 rpm
3000 rpm
3000 rpm
3000 rpm
2000 rpm
1 – 1