HEIDENHAIN TNC 410 M Technical Manual page 2

April 2007
Foreword
This Technical Manual has been written for all machine tool manufacturers. It
contains all of the information necessary for the mounting and electrical
installation of HEIDENHAIN inverter systems and HEIDENHAIN motors.
With each update, you will receive a set of supplementary pages free of
charge. Always sort these pages into your Technical Manual immediately. In
this way, your manual will always be up-to-date.
You can use extracts from this manual to supplement your machine
documentation. If you increase the size of the manual format (17 cm x 24 cm)
by the factor 1.225, you will have DIN A4 format.
No documentation can be perfect. To stay up to date, documentation must
change constantly. It is also thrives on your comments and suggestions for
improvement. Please help us by telling us your ideas.
DR. JOHANNES HEIDENHAIN GmbH
E/P Department
Dr.-Johannes-Heidenhain-Str. 5
83301 Traunreut
Ve 06
208 962-21 (208 962-E6) · 3 · 4/2007 · S · Printed in Germany · Subject to change without notice