Table of Contents
Advertisement
Conducted
interference
5 – 32
LE 426 M:
Warning
All electrical screw connections must be tightened after installation is
complete (tightening torque 3.5 Nm).
To suppress occurrence of conducted interference, toroidal cores must be
mounted in the motor leads (X80 to X84), in the voltage supply lead (X31) and
in the lead to the braking resistor (only with UE 21x). See "Mounting the
Toroidal Cores" on page 5 – 38.
HEIDENHAIN Technical Manual for Inverter Systems and Motors
Advertisement
Chapters
Table of Contents
