HEIDENHAIN TNC 410 M Technical Manual page 21

1 Update Information No. 6
1.1 General Information
1.2 Power Supply Units
1.3 Power Modules
1.4 Motors
April 2007
Chapter 4 – Mounting and Operating Conditions – was expanded:
Connection and adjustment to different types of networks
Use of climate control units
Connection requirements when water cooling is used
The power connection of regenerative and non-regenerative inverter
systems was revised
Requirements for supply lines and bus cable
New regenerative power supply units
• UVR 160 D:
• UVR 160 DW: Rated power output of 80 kW
UV 106 B power supply unit as a replacement for the UV 106
New power module
• UM 116 DW: Water cooling
New QAN 200 UH and QAN 260 UH hollow-shaft motors
Designation
QAN 200 UH
QAN 260 UH
New QAN 320L asynchronous motor
• Rated speed n
N
• Rated power output P
Terminal box of the motors of the QAN 320 series revised since
August 2006.
Update Information No. 1
Rated power output of 80 kW
Air cooling
Water cooling
Rated power output P
10 kW
22 kW
: 1500 rpm
: 40 kW
N
Rated speed n
N
1500 rpm
1500 rpm
N
1 – 1