Table of Contents
Advertisement
R0E530640MCU00 User's Manual
5.11.4 Measuring an Address Range
The Address Range sheet shows the code coverage information (C0 coverage and C1 coverage) collected by the emulator from
a user-specified address range.
Multiple address ranges can be registered.
An address range exceeding 2 Mbytes or even an area that has no coverage memory allocated can be specified. However, data
is not updated for the areas that have no coverage memory allocated.
The areas whose data are not updated are displayed in gray.
An example display is shown below.
Figure 5.76 Code Coverage window (address specification)
The Code Coverage window is vertically divided into halves by a splitter.
The upper area shows the address ranges to be measured, C0 coverage and C1 coverage.
Table 5.29 Contents displayed in the upper area of the Code Coverage window
[Address Range]
[C0 Coverage]
[C1 Coverage]
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 151 of 229
Address ranges in which coverage is measured
Shows C0 coverage by a percentage and graph
Shows C1 coverage by a percentage and graph
5. Debugging Functions
Advertisement
Table of Contents
